To be able to use all functions of the Smart Pro easily and conveniently, a connection to the local area network is strongly recommended. This is possible via Ethernet or WLAN. Make sure that the range of your WLAN extends as far as the location of the wall box. If the range is not sufficient then, for example, a repeater can be used to strengthen the signal. To ensure a stable network connection, use of a LAN cable for the link is recommended.
As a user you can configure the connection to the WLAN, by adding the wall box to your Spelsberg Wallbox app. To do so, follow the instructions in the app. Otherwise, open the app and go to "System" - "Settings" to do this. Open "More settings" and show "Expert settings", then select "Network".
Depending on whether a static or automatic network integration is to take place, the following parameters must be set. Parameters for which no setting instructions are given can be ignored in this use case.
Network parameter overview | ||
App Parameter | Settings | |
| Auto Discovery | Static configuration |
Activate WLAN | Activate | Activate |
SSID | Input |
|
WLAN password | Input |
|
WLAN IP configuration |
|
|
WLAN IP address |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
WLAN network mask |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
WLAN gateway |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
WLAN DNS server |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
Ethernet configuration |
|
|
Static Ethernet IP address |
|
|
Ethernet network mask |
|
|
Ethernet gateway |
|
|
Ethernet DNS server |
|
|
WiFi Hotspot |
|
|
WiFi Hotspot password |
|
|
For automatic connection of the wall box via Ethernet a physical connection must first be created between the wall box and the network router using a LAN cable. Chapter 9.9 of the manual contains information on this. As a user you can configure the connection to the WLAN, by adding the wall box in your Spelsberg Wallbox app. Otherwise, open the app and go to "System" - "Settings" to do this. Open "More settings" and show "Expert settings", then select "Network".
Depending on whether a static or automatic network integration is to take place, the following parameters must be set. Parameters for which no setting instructions are given can be ignored in this use case.
Network parameter overview | ||
App Parameter | Settings | |
| Auto Discovery | Static configuration |
Activate WLAN | Deactivate | Deactivate |
SSID |
|
|
WLAN password |
|
|
WLAN IP configuration |
|
|
WLAN IP address |
|
|
WLAN network mask |
|
|
WLAN gateway |
|
|
WLAN DNS server |
|
|
Ethernet configuration | Select: Automatic (DHCP) / | Select: |
Static Ethernet IP address |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
Ethernet network mask |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
Ethernet gateway |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
Ethernet DNS server |
| Input _ _ _ . _ _ _ . _ _ _ . _ _ _ |
WiFi Hotspot |
|
|
WiFi Hotspot password |
|
|