Various DLM networks can be set up which communicate via an identical IT network. This is useful, for example, if it is intended that only certain charging stations communicate with a common backend. The charging stations communicate with each other by cable within their DLM network over Ethernet or wirelessly over WLAN via a suitable access point.
For dynamic load management (DLM) to be set up, all charging stations must be part of the same network or form their own network. For configuration open the app and go to "System" - Settings. Open "More settings" and show "Expert settings". Now select "Dynamic Load Management (DLM)".
Define one charging station per charging network as the DLM coordinator, to take care of coordination with the assigned DLM charging points. Allocate a DLM network ID to each charging point and enter this both in the charging network coordinator, and in the charging points.
The following parameters are relevant:
Take all other settings from the use case of "A car park with multiple charging stations"